Laptop Touchpad Not Working or Not Clicking? How to Tell a Setting or Driver Problem From a Hardware Fault
Your cursor has frozen, jumps around, or the touchpad has stopped clicking. Before you assume the laptop is finished, it is worth working out whether this is a setting, a driver or a genuine hardware fault. Most of the time it is something simple. Occasionally it is a safety issue, and that one you shouldn't ignore.
Start with the five-minute checks
Is the touchpad switched off?
Many Windows laptops have a function-key shortcut that turns the touchpad off, and it is easy to press by accident. Look for a key with a touchpad symbol in the top row and try it, usually with the Fn key held. In Windows 11 you can also open Settings, then Bluetooth & devices, then Touchpad, and check the switch at the top is on. Some laptops also turn the touchpad off automatically when a mouse is plugged in, so check that option while you're there.
Does an external mouse change anything?
Plug in a USB mouse, or pair a Bluetooth one. If the mouse works normally, the rest of Windows is responding and the problem is isolated to the touchpad. If the mouse freezes as well, the problem is bigger than the touchpad, and a restart or a check of the laptop's overall health is the next step.
Restart, then check the driver
Restart the laptop fully (not sleep). If the touchpad is still dead, the next step is the driver. Microsoft's guidance is to update the touchpad driver through Windows Update first. If that doesn't help, you can update or reinstall it in Device Manager, where the touchpad is listed under Human Interface Devices or Mice and other pointing devices. If none of that works, Microsoft's page points you to the laptop's manufacturer.
Signs it is a software or driver problem
- It stopped after an update, a driver change or a new program, with no knock, spill or other physical event.
- The touchpad works some of the time, or works in the sign-in screen but not once Windows has loaded.
- Settings such as scrolling or tap-to-click behave oddly, but the cursor moves.
None of these proves it, but together they point towards software. If a driver reinstall and a restart don't fix it, move on to the hardware signs below rather than repeating the same steps.
Signs it is hardware
The touchpad looks raised or the case is bulging (stop here)
Look at the laptop from the side, and run a fingertip lightly across the touchpad and the surrounding palm rest. If the touchpad sits higher than it used to, feels springy, clicks unevenly, or the case is lifting or splitting, a swollen battery may be pushing it from underneath. Lithium-ion batteries that swell are a fire risk. Both the ACCC and Fire and Rescue NSW advise that a swollen battery should be taken out of use, not charged, and not be put in a household bin.
If you see this: shut the laptop down, unplug the charger, don't press on the touchpad or try to flatten it, don't try to open the case, and bring it to us in person rather than posting it. Our guide to swollen Windows laptop batteries covers the warning signs in more detail, and our article on MacBook battery warnings explains the same problem on Apple laptops.
Clicks work but the cursor doesn't, or the reverse
When the surface and the click behave differently, the cause is often the touchpad's ribbon cable or connector, a worn click mechanism, or a fault in the touchpad module itself rather than Windows. A technician can test this by checking the connection and the module directly.
Liquid or knock damage
A spill or a hard knock followed by a dead touchpad is a hardware symptom. Liquid can corrode connectors and leave residue that is not visible from outside. Switch the laptop off, don't keep trying it, and have it assessed sooner rather than later.
Keyboard and touchpad both failing
On many laptops the keyboard and touchpad share a connection to the main board. If both stop at the same time, especially after a spill, a drop or a repair someone else attempted, the fault may be in that connection or on the board itself. This is a diagnosis for a workshop, not a driver fix.
What we check in the workshop
At Macrotech we start by separating software from hardware: we test the touchpad outside Windows where we can, look for physical lifting or case distortion, and inspect the battery condition. If the fault looks physical, we check the touchpad cable and connector and test the module. If the keyboard is affected too, or there is any sign of liquid, we look at the board-level connections. We explain what we find before any work starts, and no work goes ahead without your approval. A $50 diagnostic fee applies to hardware diagnosis and is credited toward the repair if you proceed.
MacBook user?
Apple laptops use a different design, and the checks above don't all apply. Our guide to MacBook keyboard, trackpad and Touch ID problems covers the Mac side.
Local help in Carrum Downs and the south-east
We repair Windows laptops and MacBooks from our workshop at 50 Titan Drive, Carrum Downs, for customers across Frankston, Cranbourne, Lyndhurst, Langwarrin, Seaford, Skye and Patterson Lakes. See our laptop repairs page, bring the laptop in during opening hours (Monday to Friday 10:00 am to 5:00 pm, Saturday 10:00 am to 2:00 pm) or call 03 8759 1801. You can also book a repair online.
Macrotech Solutions is an independent repair centre and is not affiliated with Apple, Microsoft or any device manufacturer.
FAQs
Why did my laptop touchpad suddenly stop working?
The most common reasons are that it has been switched off by a keyboard shortcut or a setting, or that a driver has gone wrong. If neither fixes it, or you notice the touchpad lifting, a hardware fault is more likely.
Why is my touchpad not clicking?
If the cursor moves but clicking fails, check the touchpad settings first. If the touchpad looks raised or springy, stop using the laptop and have the battery checked, because swelling can push the touchpad up.
Is a raised touchpad dangerous?
It can be. A swollen lithium-ion battery is a fire risk. Shut the laptop down, unplug it and have it inspected before using it again.
Can a touchpad be repaired or replaced?
In many laptops the touchpad is a separate part that can be replaced, but on some it is part of the palm-rest assembly. We can tell you what applies to your model once we have seen it.
Should I update Windows to fix it?
Installing pending updates is reasonable, and Microsoft recommends updating the touchpad driver through Windows Update first. If the problem is physical, updates won't fix it.
Can I keep using a mouse in the meantime?
Yes, as long as there is no sign of battery swelling. If the touchpad is raised or the case is bulging, don't keep using the laptop.